Today I basically repeated what I did with the left leading edge, minus some cutting. I match drilled all the holes I could. I have everything completed up till the dis-assembly step. I don’t plan on going any farther until I receive the templates for my leading edge lights. I will probably start prepping the tanks until they come in.
Categories
- 06) Vertical Stabilizer
- 07) Rudder
- 08) Horizontal Stabilizer
- 09) Elevators
- 10) Tailcone
- 11) Empennage Attach
- 12) Empennage Fairings
- 13) Main Spars
- 14) Wing Ribs
- 15) Rear Spar
- 16) Top Wing Skins
- 17) Leading Edge
- 18) Fuel Tanks
- 19) Stall Warning System
- 20) Bottom Wing Skins
- 21) Ailerons
- 24) Wing Tips
- Empennage
- Fuselage
- Misc.
- Service Bullitens
- Tools
- Wings
- Workshop
Websites of Interest
Other RV-10 Builders
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| 21 | 22 | 23 | 24 | 25 | 26 | 27 |
| 28 | 29 | 30 | ||||