Over the last couple of days I hit a few things on my to-do list. I decided I really didn’t feel like messing around with fiberglass for now and I will have plenty of time for that later. I replaced a few rivets here and there that I didn’t like. I also started redoing the left elevator but the foam blocks did not feel like cooperating. Last night I started the fun process of tearing down the empennage. This morning I laid some blankets down over a room in my shop and had some of my employees help me lift everything up there. The tail cone went up far easier than we thought it would. After that I gave the shop a well deserved clean up.
Categories
- 06) Vertical Stabilizer
- 07) Rudder
- 08) Horizontal Stabilizer
- 09) Elevators
- 10) Tailcone
- 11) Empennage Attach
- 12) Empennage Fairings
- 13) Main Spars
- 14) Wing Ribs
- 15) Rear Spar
- 16) Top Wing Skins
- 17) Leading Edge
- 18) Fuel Tanks
- 19) Stall Warning System
- 20) Bottom Wing Skins
- 21) Ailerons
- 24) Wing Tips
- Empennage
- Fuselage
- Misc.
- Service Bullitens
- Tools
- Wings
- Workshop
Websites of Interest
Other RV-10 Builders
M | T | W | T | F | S | S |
---|---|---|---|---|---|---|
1 | ||||||
2 | 3 | 4 | 5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 | 20 | 21 | 22 |
23 | 24 | 25 | 26 | 27 | 28 | 29 |
30 | 31 |