The first thing I did this morning was to prime the skins. I didn’t have room on the cardboard last night so I decided to wait till today. I used some rivet tape to make my lines to cover the proseal area from the primer. After priming, I riveted the trim cover reenforcement plate to the skins. I put the nut plates on last night but I believe I forgot to document that.
Next involved back riveting the rib halves to the skin not too much excitement here.
Next I followed it up with riveting of the rear spar to the skin with the larger of the 2 rib halves. I also installed the shear clips and gussets at the same time.
Right around this time I ran home for dinner.