Not much to write tonight. Started putting on the gap fairings. the W-1021 fairings went on fine. Due to the SB I did yesterday I had to trim the inboard side of the W-1024 fairings about an 1/8″. Cleco’d everything in place then got side tracked with work and flying tomorrow.
Categories
- 06) Vertical Stabilizer
- 07) Rudder
- 08) Horizontal Stabilizer
- 09) Elevators
- 10) Tailcone
- 11) Empennage Attach
- 12) Empennage Fairings
- 13) Main Spars
- 14) Wing Ribs
- 15) Rear Spar
- 16) Top Wing Skins
- 17) Leading Edge
- 18) Fuel Tanks
- 19) Stall Warning System
- 20) Bottom Wing Skins
- 21) Ailerons
- 24) Wing Tips
- Empennage
- Fuselage
- Misc.
- Service Bullitens
- Tools
- Wings
- Workshop